Prevalence and extent of Alveolar dehiscence and fenestration in Class I hyperdivergent subjects with different buccolingual inclinations of maxillary molar teeth: a CBCT study

Buccolingual position of teeth could affect the prevalence of alveolar bone defects. Presence of alveolar defects may have a deleterious effect on orthodontic treatment. The aim was to assess the prevalence and extent of dehiscence and fenestration in Class I hyperdivergent subjects and correlate it with buccolingual inclinations(BL) of maxillary first molar teeth. Methods: This retrospective study involved 80 CBCTs of class I hyperdivergent subjects divided into two groups - group A (n=33) buccolingual inclination >9º and group B (n=47) buccolingual inclination <9º. Prevalence and extent of alveolar bone dehiscence and fenestrations were measured in CBCTs using OSIRIX Lite software. Descriptive statistics, Mann Whitney U test and Spearman correlation were done for evaluating intergroup differences and correlation with Buccolingual inclination. Results: Overall prevalence of dehiscence and fenestration in maxillary first molars was 60.95% and 5% respectively. In the buccal alveolar bone, prevalence of dehiscence was highest in group A (84.6%) for 16 and in the lingual alveolar bone prevalence of dehiscence was highest in group B (71.4%) for 26 . On intergroup comparison, the extent of lingual alveolar bone dehiscence (26) in group B was significantly higher (p value <0.05) than in group A. No significant correlation between the extent of dehiscence and fenestration with buccolingual inclination of molar teeth was noted. Conclusion: Molar teeth with BL inclinations of more than 9º had higher prevalence of dehiscence on the buccal side and molar teeth with BL inclinations less than 9 degrees had more dehiscence on the lingual side. But no significant correlation of BL inclination with prevalence and extent of dehiscence and fenestration was noted

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Factors affecting the stability of maxillary extraction site closure

ABSTRACT Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

RESUMO Introdução: Um efeito colateral observado nos casos tratados com extrações é a instabilidade do fechamento ortodôntico do espaço. Objetivo: O objetivo do presente estudo foi investigar a influência da invaginação gengival, da presença de terceiros molares e do padrão facial na estabilidade do fechamento ortodôntico dos locais de extração na arcada superior. Métodos: Noventa e nove indivíduos (41 homens e 58 mulheres) com má oclusão de Classe I tratados com extração de quatro pré-molares foram avaliados. A reabertura dos locais de extração e as invaginações gengivais foram avaliadas nos modelos dentários digitalizados nos estágios pós-tratamento e um ano pós-tratamento (idade média de 16,1 anos). A presença dos terceiros molares foi avaliada em radiografias panorâmicas de um ano pós-tratamento, e o padrão facial (SN.GoGn) foi avaliado nas radiografias laterais iniciais. Análise de regressão logística múltipla foi utilizada para estimar a influência das variáveis independentes citadas na frequência de reabertura do espaço de extração. Resultados: A reabertura do espaço foi observada em 20,20% dos sujeitos um ano após a remoção do aparelho. Invaginações gengivais estiveram presentes em 25,73% dos quadrantes após a remoção do aparelho e em 22,80% após um ano pós-tratamento. O SN.GoGn pré-tratamento médio foi de 35,64 graus (DP = 5,26). Não foi observada influência significativa das três variáveis independentes sobre a instabilidade do fechamento do local de extração. Conclusões: A presença de invaginações gengivais, terceiros molares e padrão de crescimento facial não parece influenciar na reabertura dos locais de extração maxilar.

Comparison of airway dimensions in skeletal Class I malocclusion subjects with different vertical facial patterns

ABSTRACT Objective: The aim of this study was to compare upper airway widths among skeletal Class I malocclusion subjects with different vertical facial patterns. Methods: The sample included a total of 99 lateral cephalograms of post pubertal individuals (18.19 ± 1.76 years old). The vertical facial pattern was determined by the Vert index. The McNamara method was used to quantify upper airway widths. ANOVA test and Student's t test for independent groups were used, when normal distribution was not supported Kruskal-Wallis test and U-Mann-Whitney test were used. A multiple linear regression analysis was also performed. Results: Statistically significant differences in several nasopharyngeal widths were found among the distinct vertical facial patterns. Subjects with brachyfacial pattern presented larger nasopharyngeal widths than subjects with mesofacial (p= 0.030) or dolichofacial (p= 0.034) patterns. The larger the Vert value, the larger the nasopharyngeal widths (R2= 26.2%, p< 0.001). At the level of oropharynx no statistically significant differences were found. Conclusion: It was concluded that nasopharyngeal linear anteroposterior widths in Class I malocclusion brachyfacial are larger than in mesofacial and dolichofacial individuals. The Vert index only explained 25% of the total variability. No correlation was found for the oropharyngeal widths.

RESUMO Objetivo: o objetivo desse estudo foi comparar as dimensões das vias aéreas superiores em indivíduos portadores de má oclusão de Classe I esquelética com diferentes padrões faciais verticais. Métodos: a amostra consistiu de 99 cefalogramas laterais de indivíduos na pós-puberdade (18,19 ± 1,76 anos). O padrão facial vertical foi determinado por meio do índice VERT. O método de McNamara foi utilizado para quantificar as dimensões das vias aéreas superiores. O teste ANOVA e o teste t de Student para grupos independentes foram utilizados e, quando a distribuição normal não era possível, o teste de Kruskal-Wallis e o teste U de Mann-Whitney foram aplicados. Foi também realizada uma análise de regressão linear múltipla. Resultados: diferenças estatisticamente significativas nas dimensões da nasofaringe foram encontradas entre os diferentes padrões faciais verticais. Os indivíduos com padrão braquifacial apresentaram dimensões nasofaríngeas maiores do que os indivíduos com padrão mesofacial (p= 0,030) ou dolicofacial (p= 0,034). Quanto maior o valor do VERT, maior a dimensão nasofaríngea (R2 = 26,2%, p< 0,001). Não foram encontradas, entretanto, diferenças estatisticamente significativas ao nível da orofaringe. Conclusão: pode-se concluir que as dimensões anteroposteriores lineares da nasofaringe nos indivíduos braquifaciais com má oclusão de Classe I são maiores do que nos indivíduos mesofaciais e dolicofaciais. O índice VERT foi capaz de explicar apenas 25% da variabilidade total. Não foi encontrada correlação para as dimensões da orofaringe.

Agenesis of mandibular second premolar in patient with dental bimaxillary protrusion

ABSTRACT The present study reports the treatment carried out in a patient with mandibular second premolar agenesis associated with early loss of a deciduous second molar, deep overbite, severe overjet and dentoalveolar bimaxillary protrusion, which led to lip incompetence and a convex facial profile. The main objectives of this treatment were: to eliminate the spaces in mandibular arch, correct overbite, as well as eliminate bimaxillary protrusion and lip incompetence, thus leading to a balanced profile. The case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as part of the requirements to obtain the title of BBO diplomate.

RESUMO O presente caso clínico relata o tratamento de uma paciente com agenesia de segundo pré-molar inferior associada à perda precoce do segundo molar decíduo, sobremordida profunda, sobressaliência exagerada e biprotrusão dentoalveolar, que causavam incompetência labial e perfil facial convexo. Os objetivos do tratamento foram eliminar os espaços presentes na arcada inferior, corrigir a sobremordida, eliminar a biprotrusão e a incompetência labial, harmonizando o perfil. Esse caso foi apresentado ao Board Brasileiro de Ortodontia e Ortopedia Facial (BBO) como parte dos requisitos para obtenção do título de Diplomado pelo BBO.

Evaluation of occlusal stability after treatment with self-ligating Damon system brackets / Avaliação da estabilidade oclusal após tratamento com aparelho autoligável do sistema Damon

Purpose: The aim of this study was to evaluate the occlusal and arch form stability of self-ligating Damon System appliance treatment, after a mean period of 3 years. Methods: The sample consisted of 20 patients (10 female and 10 male) Class I malocclusion with mild to moderate crowding treated orthodontically without extractions, with a mean initial age of 14.66 years (SD +1.40), mean final age of 17.70 years (SD +1.39) and mean age at posttreatment of 20.62 years (SD +1.42). The mean treatment time was 3.03 years (S.D. +1.17) and the mean posttreatment time was 2.92 years (S.D +0.88). Initial, final and posttreatment dental casts and panoramic radiographs of each patient were evaluated. Crowding, transverse and anteroposterior arch dimensions were measured in digital models in the maxillary and mandibular dental arches. For evaluation of the occlusal stability of orthodontic treatment it was used the Objective Grading System (OGS) in dental casts and panoramic radiographs. Intragroup comparison of all variables evaluated was performed by ANOVA and Tukey test, when necessary. For OGS comparison the dependent T test were used. Intragroup comparison of all variables evaluated was performed by ANOVA and Tukey test, when necessary. For OGS comparison the dependent T test used. Results: During treatment, there was significant decrease in the Little's Irregularity Index in maxillary and mandibular arches. No statistically significant changes in the Little's Irregularity Index were found during the follow-up period after debonding in a mean period of 2.9 years. There was significant increase in all measurements of the maxillary arch width and arch length with treatment. The mandibular measurements of arch width and arch length also showed a significant increase during treatment. At posttreatment, all maxillary and mandibular measurements remained stable, with no significant relapse of arch changes. The OGS index did not show significant changes during the posttreatment period. Conclusions: Treatment with self-ligating Damon System appliances showed increase in maxillary and mandibular arch widths and lenghts, which remain stable after a mean period of 3 years posttreatment. Treatment with this system provides maxillary and mandibular incisor alignment, as defined by Little's Irregularity index, and occlusal stability, as defined by the OGS score, with stability after a mean period of 3 years posttreatment.(AU)

Objetivo: O objetivo deste estudo foi avaliar a estabilidade oclusal e a estabilidade da forma do arco em pacientes tratados com aparelho autoligável do Sistema Damon. Material e métodos: A amostra foi constituída por radiografias panorâmicas e modelos de gesso iniciais (T1), finais (T2) e pós-tratamento (T3) de 20 pacientes (10 homens e 10 mulheres) com má oclusão de Classe I, apinhamento moderado a severo, tratados ortodonticamente sem extrações. Os pacientes apresentaram idade inicial média de 14,66 anos (D.P= +1,40), idade final média de 17,70 anos (D.P= +1,39), tempo médio de tratamento 3,03 anos (D.P= +1,17), idade de pós-tratamento média de 20,62 anos (D.P= +1,42) e tempo médio de pós tratamento de 2,92 anos (D.P= +0,88). O Índice de Estabilidade Oclusal (OGS), foi avaliado por meio de modelos de gesso e radiografias panorâmicas. As medidas transversais, sagitais e o Índice de irregularidade de Little foram realizadas utilizando-se modelos de gesso que foram digitalizados com o scanner 3Shape R700 3D (3Shape A/S, Copenhagen, Dinamarca) e mensurados através do Software OrthoAnalyzerTM 3D (3Shape A / S, Copenhagen, Dinamarca). Para comparação intragrupo de todas as variáveis avaliadas entre as fases inicial (T1), final (T2) e controle (T3), ANOVA e teste de Tukey foram utilizados. Para avalição do OGS foi utilizado o teste t dependente. Resultados: No arco superior todas as medidas da forma e comprimento do arco apresentaram um aumento com o tratamento (T2-T1), com exceção do Índice de Irregularidade de Little que diminuiu significantemente com o tratamento. As medidas mandibulares da forma e comprimento do arco também tiveram um aumento significante com o tratamento, já o Índice de Irregularidade de Little diminuiu significantemente. No período pós-tratamento (T3-T2) todas as medidas maxilares e mandibulares permaneceram estáveis, não apresentando recidiva significante da forma do arco e do Índice de Irregularidade de Little. O índice OGS não apresentou alterações significantes do fim do tratamento para o controle. Conclusão: O tratamento com aparelho autoligável do Sistema Damon apresentou aumentos na forma e comprimento do arco, mantendo-se estáveis após o período de contenção. O tratamento com este Sistema promoveu o alinhamento dos incisivos tanto superiores quanto inferiores, com resultados oclusais estáveis após um período médio de 3 anos pós-tratamento.(AU)

Maxillary dentoalveolar assessment following retraction of maxillary incisors: a preliminary study

ABSTRACT Objective: The aim of this preliminary study was to assess changes in tooth length and alveolar thickness following retraction of maxillary incisors. Methods: A total of 11 patients presenting severe maxillary dentoalveolar protrusion revealed by initial (T1) cone-beam computed tomography (CBCT), and whose treatment plan included extraction of maxillary first premolars and retraction of maxillary incisors, were selected and submitted to CBCT examination one month after the end of incisors retraction (T2). The premaxilla was assessed through seven axial slices by means of Dolphin ImagingTM software. In each of these slices, five measurements of the distance from the buccal cortical bone to the palatal cortical bone were performed. Tooth length of maxillary incisors (n = 44) was also measured in sagittal slices. Measurements were repeated after a two-week interval, and intraclass correlation coefficient (ICC) was used to test examiner calibration. Wilcoxon test was used to detect differences in measurements performed at the two time intervals. Results: The ICC was satisfactory for tooth length (0.890) and for premaxilla alveolar thickness measurements (0.980). Analysis of data showed no statistically significant differences (p > 0.05) in tooth length or alveolar thickness between the two-time intervals assessed. Conclusion: The force used in retraction of maxillary incisors in this research did not promote significant changes in tooth length of maxillary incisors or in premaxilla alveolar thickness.

RESUMO Objetivo: o objetivo deste estudo preliminar foi avaliar as alterações no comprimento dentário e na espessura alveolar durante a retração dos incisivos superiores. Métodos: um total de 11 pacientes apresentando protrusão dentoalveolar severa, de acordo com a tomografia computadorizada de feixe cônico (TCFC) inicial (T1), e que continham no seu plano de tratamento extração dos pré-molares superiores e retração dos incisivos superiores, foram selecionados e submetidos a exames de TCFC um mês após o término da retração dos incisivos (T2). Com o auxílio do software Dolphin Imaging(r), a prémaxila foi dividida em sete cortes axiais. Em cada corte axial, foram realizadas cinco medições da distância da cortical vestibular a lingual. O comprimento dos incisivos superiores (n = 44) foi medido no corte sagital. As medições foram refeitas após o intervalo de duas semanas e o coeficiente de correlação intraclasse (ICC) foi utilizado para avaliar a calibração do examinador. Utilizou-se o teste de Wilcoxon para detectar diferenças nas medições realizadas nos dois intervalos de tempo. Resultados: o ICC mostrou-se satisfatório tanto para o comprimento dentário (0,890) quanto para a espessura alveolar da pré-maxila (0,980). Não foram observadas diferenças estatísticas significativas para comprimento dentário e para as espessuras alveolares (p < 0,05) nos períodos avaliados. Conclusões: as forças atuantes na retração dos incisivos, nessa pesquisa, não provocaram alterações significativas no comprimento dentário dos incisivos superiores, nem mudanças na espessura alveolar da pré-maxila.

Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

ABSTRACT Objective: The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment. Case report: A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine) was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany) was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm) (Jeil Medical Corporation Seoul, South Korea). Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months. Results: A nearly bodily distal movement without anchorage loss was obtained. Conclusion: The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth.

RESUMO Objetivo: o objetivo do presente estudo foi apresentar um novo método para a distalização bilateral de todo o segmento posterior superior. Relato do caso: uma jovem de 17 anos de idade, com má oclusão esquelética de Classe I (relação de molares em topo a topo, linha média desviada e deficiência de espaço para o canino superior esquerdo) foi encaminhada para tratamento ortodôntico, mas recusou-se a autorizar a extração dos primeiros pré-molares superiores. Um aparelho Hyrax modificado (Dentaurum, Ispringen, Alemanha) foi utilizado para a distalização bilateral simultânea dos dentes posteriores superiores. O vetor de expansão foi definido no sentido anteroposterior. As barras de conexão posteriores do Hyrax foram soldadas às bandas dos primeiros molares superiores. Em cada um dos lados, todos os dentes posteriores foram agrupados com um segmento de fio de aço inoxidável de calibre 0,017" x 0,025" passando por vestibular. As barras de conexão anteriores do Hyrax foram dobradas em forma de loop e conectadas à região anterior do palato por meio de dois mini-implantes (2 x 10mm) (Jeil Medical Corporation, Seoul, Coreia do Sul). A taxa de abertura do Hyrax foi de 0,8mm / mês. Telerradiografias laterias foram usadas para avaliar a extensão dos movimentos de distalização. Resultados: em um prazo de cinco meses, foi obtida uma distalização de 3,5mm dos dentes posteriores superiores. O movimento realizado foi praticamente de corpo (translação), sem qualquer perda de ancoragem. Conclusão: o aparelho Hyrax modificado suportado por mini-implantes mostrou-se útil para efetuar o movimento de distalização em massa dos dentes posteriores superiores.

Tomographic evaluation of the temporomandibular joint in malocclusion subjects: condylar morphology and position

Abstract The aim of this study was to investigate condyle concentricity and morphology, and their association with Class I and II malocclusions (Angle). The sample consisted of 49 individuals of both genders, between 11 and 35 years old, divided into two groups, G1: 26 patients with Class I malocclusion, and G2: 23 patients with Class II malocclusion, selected for orthodontic treatment. Evaluation of the condyle morphology and position was performed by the same previously calibrated examiner using cone-beam computed tomography (CBCT) images of the subjects. The CBCT scans were analyzed by means of a 3D program (Dolphin 11.5, Dolphin Imaging & Management Solutions, Chatsworth, CA, USA), with a 25% level of sensitivity. The images obtained from the coronal slices were employed for the condyle morphology analysis, which classified the condyle form as rounded, as flat or convex, and as triangular or angled. The sagittal slices were used to classify further the condyles as concentric and displaced anteriorly or posteriorly. A clinical examination was also performed, including TMJ and muscle palpation. The kappa test was used to evaluate investigator calibration; the Chi-square and paired t-tests were used for analysis. The convex and anteriorly positioned condyles were found most frequently, regardless of the type of malocclusion. No association was observed between the groups regarding condylar characteristics.

Assessment of upper airways measurements in patients with mandibular skeletal Class II malocclusion

Objective: Mandibular Class II malocclusions seem to interfere in upper airways measurements. The aim of this study was to assess the upper airways measurements of patients with skeletal Class II malocclusion in order to investigate the association between these measurements and the position and length of the mandible as well as mandibular growth trend, comparing the Class II group with a Class I one.Methods:A total of 80 lateral cephalograms from 80 individuals aged between 10 and 17 years old were assessed. Forty radiographs of Class I malocclusion individuals were matched by age with forty radiographs of individuals with mandibular Class II malocclusion. McNamara Jr., Ricketts, Downs and Jarabak's measurements were used for cephalometric evaluation. Data were submitted to descriptive and inferential statistical analysis by means of SPSS 20.0 statistical package. Student's t-test, Pearson correlation and intraclass correlation coefficient were used. A 95% confidence interval and 5% significance level were adopted to interpret the results.Results:There were differences between groups. Oropharynx and nasopharynx sizes as well as mandibular position and length were found to be reduced in Class II individuals. There was a statistically significant positive correlation between the size of the oropharynx and Xi-Pm, Co-Gn and SNB measurements. In addition, the size of the nasopharynx was found to be correlated with Xi-Pm, Co-Gn, facial depth, SNB, facial axis and FMA.Conclusion: Individuals with mandibular Class II malocclusion were shown to have upper airways measurements diminished. There was a correlation between mandibular length and position and the size of oropharynx and nasopharynx.

Introdução: as más oclusões de Classe II mandibulares parecem interferir nas dimensões das vias aéreas superiores. Assim, o objetivo do presente estudo foi avaliar as vias aéreas superiores de pacientes com Classe II esquelética, verificando a associação entre essas dimensões e a posição mandibular, o comprimento mandibular e a tendência de crescimento, comparando-os com um grupo pareado de pacientes com Classe I.Métodos: foram avaliadas 80 telerradiografias de perfil de 80 pacientes com 10 a 17 anos de idade, sendo 40 com má oclusão de Classe I e 40 com Classe II mandibular, pareados por idade. Para a avaliação cefalométrica, foram utilizadas medidas de McNamara Jr, Ricketts, Downs e Jarabak. Os dados foram submetidos à análise estatística descritiva e inferencial, por meio dosoftware SPSS 20.0, utilizando-se os testest de Student, coeficiente de correlação de Pearson e coeficiente de correlação intraclasse. Para interpretação dos resultados, adotou-se um intervalo de confiança de 95% e nível de significância de 5%.Resultados: houve diferença entre os grupos, e as medidas da orofaringe e nasofaringe foram menores no grupo de Classe II, assim como as medidas de comprimento e posição mandibular. Houve correlação positiva estatisticamente significativa entre a orofaringe e as medidas Xi-Pm, Co-Gn e SNB; já a nasofaringe apresentou correlação com as medidas Xi-Pm, Co-Gn, profundidade facial, SNB, eixo facial e FMA.Conclusão: indivíduos portadores de Classe II mandibular apresentaram as medidas das vias aéreas superiores diminuídas. Observou-se uma correlação entre o comprimento mandibular e a posição mandibular e as dimensões da orofaringe e da nasofaringe.

Radiographic evaluation of orthodontic treatment by means of four different cephalometric superimposition methods

INTRODUCTION: Despite discussion on the merit of various cephalometric superimposition methods, there remains a need to assess which one can be used in daily practice with reasonably accuracy and less working time. OBJECTIVE: The aim of this study was to investigate four methods of cephalometric superimposition by means of assessing the longitudinal changes in craniofacial morphology caused by growth and response of adolescents with Class I malocclusion to orthodontic treatment involving first premolar extraction. METHODS: Pretreatment (T1) and post-treatment (T2) standardized lateral cephalometric radiographs of 31 adolescents (20 females and 11 males), with Angle Class I malocclusion and indication of premolar extraction, participated in this study. Radiographs were digitized, traced and had structures identified by means of a cephalometric software. Four superimposition methods were used: Björk structural method, Steiner/Tweed SN line, Ricketts N-Ba line at N-point and Ricketts N-Ba line at CC-point. Positional changes were quantified by horizontal and vertical linear changes in the following cephalometric landmarks: anterior/posterior nasal spine (ANS and PNS), gnathion (Gn), Gonion (Go), Pogonion (Pog), A-point and B-point. Differences between T1 and T2 in horizontal and vertical positional changes for all superimposition methods were assessed by one-way analysis of variance (ANOVA) and Bonferroni correction (p < 0.05). RESULTS: There were no statistically significant differences among the cephalometric superimposition methods or when patients' sex was considered. CONCLUSION: Björk structural method, Steiner/Tweed SN line, Ricketts N-Ba line at N-point and Ricketts N-Ba line at CC-point methods were reliable and presented similar precision when the overall facial changes due to active growth and/or orthodontic treatment were examined. .

INTRODUÇÃO: apesar dos debates sobre os méritos dos vários métodos de sobreposição cefalométrica, ainda há necessidade de se avaliar quais deles poderiam ser utilizados na prática diária, com razoável precisão e menor tempo de trabalho. OBJETIVO: o objetivo desta pesquisa foi investigar quatro métodos de sobreposição cefalométrica, avaliando as mudanças longitudinais na morfologia craniofacial causadas pelo crescimento e resposta ao tratamento, em adolescentes com má oclusão de Classe I tratados ortodonticamente com extração de primeiros pré-molares. MÉTODOS: foram usadas telerradiografias laterais pré-tratamento (T1) e pós-tratamento (T2) de 31 adolescentes (20 do sexo feminino e 11 do sexo masculino), com Classe I de Angle e indicação de extração de pré-molares. As radiografias foram digitalizadas, traçadas e as estruturas, identificadas com um software cefalométrico (Radiocef, Radio Memory, Belo Horizonte, Brasil). Quatro métodos de sobreposição foram utilizados para avaliar mudanças de posição devidas ao crescimento e/ou tratamento: método Estrutural de Björk; método Steiner/Tweed linha SN; Ricketts linha N-Ba no ponto N; e Ricketts linha N-Ba no ponto CC. As mudanças posicionais avaliadas pelos métodos de sobreposição foram quantificadas por mudanças lineares horizontais e verticais nos seguintes pontos cefalométricos: espinha nasal anterior (ENA), espinha nasal posterior (ENP), gnátio (Gn), Gônio (Go), Pogônio (Pog), Ponto A e Ponto B. Mudanças de posição horizontal e vertical entre T1 e T2 para todos os métodos de sobreposição foram avaliadas por análise de variância (ANOVA) e teste de Bonferroni (p < 0,05). RESULTADOS: não houve diferença estatística significativa entre os métodos de sobreposição cefalométrica em toda a amostra ou quando o sexo dos pacientes foi considerado. CONCLUSÃO: de acordo com a metodologia aplicada nesse estudo, os métodos de sobreposição cefalométrica Estrutural de Björk, de Steiner/Tweed linha SN, ...

Relations between the mandibular canal and I, II and III Angle classes in panoramic radiographs / Relaciones entre el canal mandibular y clases I, II y III de Angle en radiografías panorámicas

To prevent injury to the inferior alveolar nerve during dental procedures, knowledge of its anatomical location and course of the mandibular canal is imperative. The aim of this study was evaluate the location on panoramic radiographs of the mandibular canal in relation to the apices of the permanent mandibular molars and base mandible, and relate the type of mandibular canal with Angle classes I, II and III. We evaluated 748 panoramic radiographs distributed according to sex and occlusal class (Angle I, II and III) of fully dentate individuals, 18­51 age group. The radiographs were divided according to Angle classes based on cephalometric tracing, clinical data from the medical records of each individual and the analysis of of the maxillar and mandibular dental arches models. The same individuals had the mandibular canal bilaterally assessed, and classified according to their location relative to the root apices of the mandibular molars and mandible base. Measurements of the distance from the mandibular canal to the apices of the teeth and mandible base were made on the Software ImageLab2000®. The intra-observer reproducibility of measurements on radiographs was assessed using the coefficient of variation (p<0.0001). Data were submitted to Kruskal-Wallis test, on software BioEstat 5.0. There were statistically significant differences (Kruskal-Wallis test, p <0.0001) between the occlusal classes, with the type of mandibular canal. A larger number of canals types 2 and 3 in class III individuals than in others. In conclusion, the location of the mandibular canal presents morphological changes in relation to the apices of the permanent molars, and the mandibular base according to the Angle classes I, II and III.

Para evitar lesiones del nervio alveolar inferior durante los procedimientos odontológicos, el conocimiento de la localización anatómica y curso del canal mandibular (CM) es imprescindible. El objetivo fue evaluar la localización del CM sobre radiografías panorámicas en relación con los ápices de los molares mandibulares permanentes y la base mandibular, relacionando el tipo de CM con las clases I, II y III de Angle. Se evaluaron 748 radiografías panorámicas distribuidas según sexo y clase oclusal (I, II y III de Angle) en individuos totalmente dentados (edad entre 18-51 años). Las radiografías fueron divididas de acuerdo a las clases de Angle según su trazado cefalométrico, datos clínicos de los registros médicos de cada individuo y el análisis de modelos de sus arcos dentarios mandibulares y maxilares. En los individuos se evaluó el CM bilateralmente y se clasificó de acuerdo a su ubicación en relación con los ápices radiculares de los molares mandibulares y base mandibular. Las mediciones de distancia desde el CM a los ápices radiculares y base mandibular se hicieron con el programa ImageLab2000®. Se evaluó la reproducibilidad intra-observador de las mediciones en las radiografías usando el coeficiente de variación (p<0,0001). Los datos fueron sometidos a la prueba de Kruskal ­Wallis con el programa BioEstat 5.0. Se observaron diferencias estadísticamente significativas (prueba de Kruskal-Wallis, p<0,0001) entre las clases oclusales y el tipo de CM. Hubo mayor número de canales tipos 2 y 3 en los individuos clase III. La ubicación del canal mandibular presenta cambios morfológicos en relación con los ápices de molares permanentes y la base mandibular de acuerdo a las clases I, II y III de Angle.

Masseter muscle thickness in different skeletal morphology: An ultrasonographic study.

Background: The thickness of the masseter muscle during relaxation and contraction states was measured by ultrasonography. Subjects were classified according to their sagittal skeletal relationships. The association between muscle thickness and facial morphology was studied. Context: Masseter muscle thickness influences the skeletal patterns. Aim: To measure and compare the thickness of the masseter muscle in individuals with skeletal class I occlusion and skeletal class II malocclusions and to correlate its relationship with craniofacial morphology. Settings and Design: The study was conducted in a hospital setup and was designed to study the thickness of the masseter muscle in different skeletal morphologies. Materials and Methods: Seventy two individuals between the ages of 18 and 25 years were divided into Group I, Group IIA and Group IIB according to their skeletal relationships. Masseter muscle thickness was measured by ultrasonography. Eight linear and six angular cephalometric measurements were assessed. Statistical Analysis Used: Analysis of variance and Pearson's correlation analysis. Results: There was a statistically significant difference in muscle thickness between subjects of different skeletal patterns. Significant positive correlation between masseter muscle thickness and posterior total face height, jarabak ratio, ramus height, mandibular length and significant negative correlations with mandibular plane angle, gonial angle and PP-MP angle were observed. Conclusion: This study indicates the strong association between the masseter muscle and skeletal morphology.